Icom iR8600, Reference Manual

Page: 21 / 24

D
Command formats (Continued)

DCR RX ID
Command:
20 0C01, 20 0C02
q
,
w
u
~
!0
0 X 0 X 0 X X X X X 0 X
0 X 0 X X X 0 X 0 X 0 X
0 (Fixed)
0 (Fixed)
!1
,
!2
e
~
y
q
Header flag data (First byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0 (Reserved)
bit3
See the table below Type of call
bit2
bit1 0/1 0=Encryption OFF, 1=Encryption ON
bit0 0 (Reserved)
Data
Description
bit3 bit2
1 1 All call
1 0 Group call
0 1 Individual call
0 0 Not identified
w
Header flag data (Second byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0 (Reserved)
bit3 0 (Reserved)
bit2 0 (Reserved)
bit1 0 (Reserved)
bit0 0 (Reserved)
e
~
y
: ID of the CALLER station (4 digits in Hexer decimal)
u
~
!0
: ID of the CALLED station (4 digits in Hexer decimal)
!1
,
!2
: UC (3 digits in decimal)
L
If the UC, CALLER or CALLED station is not identified,
"FF" is returned.
L
FF: No signal has been received since the power was
turned ON.

DCR RX Status data
Command:
20 0D01, 20 0D02
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 — (Reserved)
bit4 0/1 Receive
status
While receiving a DCR signal, "1" is
returned. (Regardless of UC)
bit3 0/1 Last call
finisher
When the last call was finished by a
user, “1” is returned.
bit2
0/1 Receiving a
signal
When the audio tone can be heard, “1”
is returned.
bit1
0/1 Interfere
detection
While under an interference (Mode icon
DCR and FM alternately blink), "1" is
returned.
bit0 0/1 Encryption When the call is
encrypted
, "1" is
returned.

D-STAR RX data (transceive)
Command: 22 0101
q
~
#0
• • • • • • • • • • • • • • • • • • • • • • • • X X X X
q
~
#0
:Rx data (Up to 30 Bytes)
L
“FA” to “FF” are entered after converted to “FF 0A” to
“FF 0F” automatically. In this case, the data length can
be up to 60 Bytes.

Selected or unselected VFO frequency
Command:
25
00: Fixed
Refer to the receive frequency data
X X X X X X X X X X X X
Remote control
20