Icom iR8600, Reference Manual

Page: 20 / 24


dPMR RX status data
Command:
20 0901, 20 0902
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 dPMR mode While receiving a dPMR Tier 2 signal,
"1" is returned.
bit4 0/1 Receive
status
While receiving a dPMR signal, "1" is
returned. (Regardless of CC or COM ID)
bit3 0/1 Last call
finisher
When the last call was finished by a
user, “1” is returned.
bit2 0/1 Receiving a
signal
When the audio tone can be heard, “1”
is returned.
bit1 0/1 Interfere
detection
While under an interference (Mode icon
dPMR and FM alternately blink), "1" is
returned.
bit0 0/1 Scrambler When the call is scrambled, "1" is
returned.

NXDN RX ID
Command: 20 0A01, 20 0A02
y
~
i q
,
w o e
~
t
0 (Fixed)
0 X X X 0 X X X X X X X X X X X X X
q
Header flag data (First byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0/1 0=Very narrow, 1=Narrow
bit3
See the table below Type of call
bit2
bit1
0/1 0=Encryption OFF, 1=Encryption ON
bit0
0 (Reserved)
Data
Description
bit3 bit2
1 1 All call
1 0 Group call
0 1 Individual call
0 0 Not identified
w
Header flag data (Second byte)
Data Description
bit7 0 (Fixed) —
bit6 0 (Reserved)
bit5 0 (Reserved)
bit4 0 (Reserved)
bit3 0 (Reserved)
bit2
0 (Reserved)
bit1
0 (Reserved)
bit0
0 (Reserved)
e
~
t
: ID of the CALLER station (5 digits in decimal)
y
~
i
: ID of the CALLED station (5 digits in decimal)
o
: RAN (2 digits in decimal)
L
If the RAN, CALLER or CALLED station is not identified,
"FF" is returned.
L
FF: No signal has been received since the power was
turned ON.

NXDN RX Status data
Command:
20 0B01, 20 0B02
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 — (Reserved)
bit5 0/1 NXDN mode When the received NXDN signal is
"Narrow," "1" is returned.
bit4 0/1 Receive
status
While receiving an NXDN signal, "1" is
returned. (Regardless of RAN)
bit3 0/1 Last call
finisher
When the last call was finished by a
user, “1” is returned.
bit2 0/1 Receiving a
signal
When the audio tone can be heard, “1”
is returned.
bit1 0/1 Interfere
detection
While under an interference (Mode icon
NXDN-
vn
/
n
and FM alternately blink),
"1" is returned.
bit0 0/1 Encryption When the call is encrypted , "1" is
returned.
D
Command formats (Continued)
Remote control
19