manualshive.com logo in svg

Icom IP503H, Instruction Manual, Page: 58 / 74

Share
Download
Icom IP503H Instruction Manual Download Page 58

5

OPTIONAL PRODUCTS

5-21

1. 

While hold down [FUNC] and [Address], turn ON the power.

 •

Enters the Set mode.

2. 

Release [FUNC] and [Address] when "SET” is displayed.

3. 

Push [FUNC] several times to select “Delete Bluetooth Device.”

4. 

Push [▲]/[▼] to select the device to delete.

5. 

Push [Call history].

 •

 “Delete?” is displayed.

 •

To cancel deleting, push any key other than [Call history].

6. 

Push [Call history].

 •

 The selected device is deleted from the pairing list, then exits the Set mode.

■ Deleting a Bluetooth device from the pairing list

You can delete Bluetooth devices from the “Pairing List” screen. 

L

Disconnect the Bluetooth device before deleting if connected. (pp. 5-17 and 5-18)

– – –

LOG

SET

ICOM BT-000:00-00

Delete BT Device

SET

Completed to delete

Delete BT Device

SET

[電源/音量]

ツマミ

[FUNC]

キー

[▲]/[▼]

キー

[履歴]

キー

[アドレス帳]

キー

[PWR/VOL]

[FUNC]

[Call history]

[Address]

[▲]/[▼]

Summary of Contents for IP503H











































































Reviews:

No comments