manualshive.com logo in svg

Icom IP503H, Instruction Manual, Page: 34 / 74

Share
Download
Icom IP503H Instruction Manual Download Page 34

4

SET MODE

4-5

■ Setting item list (continued)

The shaded items (

■ ■

) are also displayed in the Basic Set mode.

L

Items or default values may differ, depending on the presetting. Ask your dealer for details.

Item

Description

Option/range

Default

Sidetone

The Sidetone function outputs the transmit

-

ting audio to a headset that is connected to the 

transceiver.

 When this item is set to “Enable,” the Echo Can

-

celler function is automatically set to “Disable.”

Disable or Enable

Disable

Sidetone Volume

Sets the Side tone volume.

0 ~ 32

10

VOX

Automatically switches between receive and 

transmit by detecting your voice.

Disable, Bluetooth Mic, 

Headset or Earphone-Mic

Disable

VOX Threshold

Sets the VOX gain level.

L

 Lower values make the VOX function more 

sensitive to your voice.

0% ~ 100%

40%

Echo Canceller

Sets the Echo Cancelling function.

( commonly used for an earphone MIC and 

headset)

 When the  “SideTone” item is set to “Enable,” this 

item is fixed to “Disable.”

Disable or Enable

Enable

Noise Canceller

Sets the Noise Cancelling function.

( commonly used for a transceiver, earphone MIC 

and headset)

Disable or Enable

Enable

BackLight

Sets the backlight operating function.

Auto, OFF or ON

Auto

Contrast

Sets the screen contrast.

1 (lowest) ~ 16 (highest)

8

Mic Gain

Sets the microphone sensitivity.

L

 Higher values make the microphone more 

sensitive to your voice.

－

12  dB  (lowest)  ~  12  dB 

(highest) (in 3 dB step)

0 dB

Notify Beep Vol.

Sets the notification beep level.

0 ~ 32

10

Key-Touch Beep

Sets the Key-touch beep.

Disable or Enable

Enable

Key Beep Vol.

Sets the Key-touch beep level.

0 ~ 32

10

RX Buffer Type

Sets the Jitter buffer size.

L

 Jitter buffer reduces audio interruptions.

Dynamic,

40 ~ 480 milliseconds

(in 40 milliseconds step)

Dynamic

Tx Inhibit

Inhibits transmission.

 Select “Enable” to lock all the controls except 

[PWR/VOL].

L

 Transmission is also inhibited while using an 

external microphone, and the VOX function.

Disable or Enable

Disable

PTT Lock

Inhibits transmission by the internal PTT.

Disable or Enable

Disable

Call Type Stnby

Displays the call-to party (Call type) on the 

standby screen.

Disable or Enable

Enable

One Touch PTT

Toggles receiving and transmitting by momentari

-

ly pushing [PTT].

Push [PTT] to talk, then push again to return to 

receive.

L

 When “Enable” is selected, “One Touch PTT” 

is displayed when [FUNC] is pushed.

Disable or Enable

Disable

Summary of Contents for IP503H











































































Reviews:

No comments