manualshive.com logo in svg

Icom IP503H, Instruction Manual, Page: 49 / 74

Share
Download
Icom IP503H Instruction Manual Download Page 49

5

OPTIONAL PRODUCTS

5-12

1. Turning ON the Bluetooth function

1. 

While holding down [FUNC], turn ON the transceiver power.

 •

Enters the Set mode.

2. 

Release [FUNC] when “SET” is displayed.

3. 

Push [FUNC] several times to select “Bluetooth.”

4. 

Push [▲]/[▼] to select “Enable.”

5. 

Push [CLR/LOCK].

 •

Exits the Set mode.

■ 

Pairing the IP501H/IP503H with the BC-218 or VS-3

– – –

LOG

SET

Enable

Bluetooth

SET

[FUNC]

キー

[▲]/[▼]

キー

[CLR/LOCK]

キー

[電源/音量]

ツマミ

Pairing is a process to be able to establish a connection between a headset and other Bluetooth devices. Once pairing is 

established with the device, there is no need to pair again.

 •

 You may not find a target Bluetooth device if there are many other Bluetooth

®

 devices nearby. In that case, stop using 

those devices, or move away from them.

 •

 When the Bluetooth function is turned OFF, the audio is output from the transceiver. Be sure to not set the 

transceiver's volume level too high.

L

Guaranteed Bluetooth devices are the BC-218 and VS-3. (as of May 2019)

[PWR/VOL]

[FUNC]

[CLR/LOCK]

[▲]/[▼]

Summary of Contents for IP503H











































































Reviews:

No comments