background image

 

©2014 Icom America Inc.

 

Page 1

 

 

Icom America, Inc. 

12421 Willows Road NE 

Kirkland, WA 98034 

 

 

 

Quick Guide for IP Advanced Radio System over an Existing 
Wireless LAN 

 

This application describes all the programming required to configure a working IP Advanced 
Radio System that is being connected to an existing customer’s office WLAN (Wireless LAN) 
Network. 

Contents 

What You Will Need ........................................................................................................................ 2

 

Customer’s Current IP Settings ....................................................................................................... 2

 

Programming the IP1000C Controller ............................................................................................. 3

 

Creating Unit IDs in the IP1000C Web Interface ............................................................................ 5

 

Entering IP100H Radio information ............................................................................................ 5

 

Programming the IP100H Radios with the CS-IP100H Cloning Software ....................................... 7

 

Creating Group IDs in the IP1000C Web Interface ......................................................................... 9

 

Group ID Information .................................................................................................................. 9

 

Creating a Radio ID List in the IP1000C Web Interface................................................................. 10

 

ID List Information .................................................................................................................... 10

 

Talk Back Timer Setting ............................................................................................................. 13

 

Making a Group Call from your IP100H Radio .............................................................................. 14

 

 

 

 

Summary of Contents for IP100H















Reviews: