![background image](http://html2.mh-extra.com/html/icom/ip100h/ip100h_quick-manual_3495332009.webp)
©2014 Icom America Inc.
Page 9
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034
Note: This password talks to the controller not the WLAN System.
10.
Programming Radio no. 2: Enter “2” in
TRX No.
Box for Transceiver No. 2.
11.
Enter Password (iptrx) same as setup in the IP1000C for Unit ID 2.
12.
Click CLONE and Write to upload the file into the Radio.
Repeat these steps for any additional radios.
After rebooting your IP100H radios, the IP1000C will download all information to the radio and
allow it to register.
If they do not connect to the network and show “Setting up” or “Failed”, read through the
previous steps and verify the information.
Creating Group IDs in the IP1000C Web Interface
Group ID Information
This procedure explains how to create Groups and then add existing Radios as programmed in
the
Transceiver Registration screen
above to one or more of the groups.
1.
Click
Destination Settings
.