![background image](http://html1.mh-extra.com/html/icom/if50v/if50v_instruction-manual_2038198023.webp)
17
3
BASIC OPERATION
3
D
Receiving note
• Vibration function
(Depends on the version)
When the matched RX code signal is received, the transceiver may
vibrate for a specified time period, depending on the pre-setting.
Push any key or [PTT] to stop the vibration.
NOTE:
•
The transceiver cannot stop the vibration suddenly after push-
ing any key or [PTT].
•
The vibration sound may be heard at the communication party,
or be recorded if the recording function is activated when [PTT]
is pushed to stop the vibration.
D
Transmitting notes
• Transmit inhibit function
The transceiver has several inhibit functions which restrict trans-
mission under the following conditions:
- The channel is in mute condition (
‘
Inaudible
’
condition;
“
”
does not appear).
- The channel is busy.
- Un-matched (or matched) CTCSS is received. (Depending on
the pre-setting)
- The selected channel is a
‘
receive only
’
channel.
• Time-out timer
After continuous transmission for the pre-programmed time period,
the time-out timer starts, causing the transceiver to stop transmit-
ting.
• Penalty timer
Once the time-out timer starts, transmission is further inhibited for a
period determined by the penalty timer.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 17 (1,1)