14
3
BASIC OPERATION
■
Turning power ON
q
Rotate [VOL] to turn power ON.
•
When the opening vibration function is turned ON, the transceiver
vibrates for 2 sec. Ask your dealer for details.
w
If the transceiver is programmed for a start up passcode, input
digit codes as directed by your dealer.
•
The keys in the table below can be used for password input:
•
The transceiver detects numbers in the same block as identical.
Therefore
“
01234
”
and
“
56789
”
are the same.
e
When the
“
PASSWORD
”
indication does not clear after inputting
4 digits, the input code number may be incorrect. Turn the power
off and start over in this case.
■
Channel selection
Several types of channel selections are available. Methods may dif-
fer according to your system set up.
NON-ZONE TYPE:
Push [CH Up]/[CH Down] to select the desired operating channel
in sequence; or, push one of [MR-CH 1] to [MR-CH 4] to select a
channel directly.
ZONE TYPE:
Push [Zone] then push [CH Up]/[CH Down] to select the desired zone.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning the
power ON, the transceiver automatically starts scanning. Scanning
stops when receiving a call.
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6
or
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 14 (1,1)
