![background image](http://html1.mh-extra.com/html/icom/if50v/if50v_instruction-manual_2038198022.webp)
16
3
BASIC OPERATION
■
Receiving and transmitting
NOTE:
Transmitting without an antenna may damage the trans-
ceiver. See p. 2 for antenna attachment.
Receiving:
q
Rotate [VOL] to turn power ON.
w
Push [CH Up] or [CH Down] to select a channel.
e
When receiving a call, adjust the audio output level to a comfort-
able listening level.
Transmitting:
Wait for the channel to become clear to avoid interference.
q
While pushing and holding [PTT], speak into the microphone at a
normal voice level.
•
When a tone signalling system is used, the call procedure de-
scribed at the previous page may be necessary.
w
Release [PTT] to return to receive.
IMPORTANT:
To maximize the readability of your signal;
1. Pause brie
fl
y after pushing [PTT].
2. Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak into the microphone at a normal voice
level.
! IC-F50V_F60V_0.qxd 07.8.6 10:36 AM Page 16 (1,1)