![background image](http://html1.mh-extra.com/html/icom/if4029sdr/if4029sdr_instruction-manual_4258669025.webp)
20
7
DIGITAL OPERATION
7
n
Receiving a call
q
When a call is received;
• “
” and “
” appears and the mute is released.
Appears
Appears
w
Push and hold [PTT], then speak into the microphone at a
normal voice level.
• “
” appears.
NOTE:
Only one station is permitted to speak.
e
Release [PTT] to return to receive.
r
To finish the conversation, push
(Clear) to send the
‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “STANDBY” is displayed for 2 sec. (approx.)
• “
” disappears and the transceiver returns to the standby condi-
tion.
n
Ringer operation
Before starting communication, you can send the Ringer call
to announce your group station that you are going to trans-
mit.
See p. 14 for details of the ringer procedure.
* (S-Ring/Ringer) is replaced with (Call) in the illustra-
tion on page 14.
q
Set the desired Common ID. (pgs. 19, 39)
w
Push
(Call) to send the Ringer call.
• When a member of your group station answers your call, the re
-
ceived transceiver emits beep tones* and “
” appears on either
side.
• “
” blinks on the received transceiver.
* The Ringer emission type can be selected in Set mode.
(p. 27)
e
Push [PTT] to transmit; release to receive.
r
Push
(Clear) to send the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “STANDBY” is displayed for 2 sec. (approx.)
• “
” disappears and the transceiver returns to the standby condi-
tion.
NOTE:
This function is available only when the called
station has use the same Common ID and the same
operating channels as you.
Summary of Contents for iF4029SDR
Page 1: ...INSTRUCTION MANUAL UHF TRANSCEIVER iF4029SDR ...
Page 47: ...MEMO 13 ...