![background image](http://html1.mh-extra.com/html/icom/if3200dex-series/if3200dex-series_operating-instructions-manual_4733680020.webp)
3
BASIC OPERATION
3-8
You can adjust the beep level between 1 and 5, or 1
(linked) and 5 (linked).
When a linked level is selected, you can adjust the beep
level by rotating [VOL].
Rotate [VOL] to turn OFF the transceiver power.
q
Set [ROTARY SELECTOR] to any channel other
w
than Channel 16.
While holding down [Lower], rotate [VOL] to turn
e
ON the power and enter the beep level adjustment
mode.
Push [Upper] to change the beep level as shown to
r
the right.
• A beep sounds every time you push [Upper]. Therefore,
you can determine the current level setting by the in-
creasing loudness of the beep that sounds.
• To determine if you have selected a linked level, set [VOL]
to minimum, then push [Upper] repeatedly, listening for
the loudest beep (level 5). Pushing [Upper] once after the
loudest beep will select 1 (Linked). Repeatedly push [Up-
per] to select the desired linked level.
Rotate [VOL] to turn OFF the power to exit the beep
t
level adjustment mode.
NOTE:
This operation may not be available, depend-
ing on the presetting.
Setting the beep level
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
Pushing
[Upper]
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]