![background image](http://html1.mh-extra.com/html/icom/if3200dex-series/if3200dex-series_operating-instructions-manual_4733680033.webp)
5
SPEAKER MICROPHONE
5-2
Optional HM-203EX
Description
D
NEVER
immerse the connector in water. If the con-
nector becomes wet, be sure to dry it BEFORE con-
necting it to the transceiver.
NOTE:
The microphone is located at the top of the
speaker microphone, as shown in the diagram above.
To maximize the readability of your transmitted sig-
nal (voice), hold the microphone approximately 5 to
10 cm (2 to 4 inches) from your mouth, and speak at
your normal voice level.
Speaker
Belt clip
Microphone
PTT SWITCH
Hold down to
transmit, release
to receive.
Turn OFF the trans-
ceiver power when
connecting or dis-
connecting the mi-
crophone.
To attach
D
BE SURE
to turn OFF the power before attaching.
Attach the connector of the speaker microphone into
➥
the multi connector on the transceiver, and tighten
the screw.
IMPORTANT: KEEP
the connector cover attached
to the transceiver when the speaker microphone is
not in use. (p. 1-4)
Water will not get into the transceiver even if the cov-
er is not attached, however, the terminals (pins) will
become rusty, or the transceiver will function abnor-
mally if the connector becomes wet.
Turn OFF the power
CAUTION:
Attach the
multi connector snugly,
but do not overtighten.
A loose connection will
allow water intrusion into
the connector. A over-
tightened connector will
damage the connector
pins in the transceiver.