16
4
SIGNALING OPERATIONS
NOTE:
The tone signalling operations are available for the
IC-F3013/F4013 only.
■
Call procedure
When your system employs tone signalling (excluding CTCSS and
DTCS), the call procedure may be necessary prior to voice trans
-
mission. The tone signalling employed may be a selective calling
system which allows you to call specific station(s) only and prevent
unwanted stations from contacting you.
q
Select the desired TX code channel or 2/5-tone code according
to your System Operator’s instructions.
• This may not be necessary depending on programming.
w
Push
[Call]
. (p. 11)
e
After transmitting a 2/5-tone code, the remainder of your com
-
munication can be carried out in the normal fashion.
Selective calling
Non-selective calling
D
Transmitting notes— PTTID call
The transceiver sends the ID code (5-tone, DTMF or digital ANI)
automatically when
[PTT]
is pushed (beginning of transmission)
and released (end of transmission) depends on the setting.
Summary of Contents for iF3011
Page 35: ...27 6 BATTERY CASE 6 q BP 240 w Fig 1 Fig 2 Fig 3 e r t...
Page 45: ...MEMO 9...
Page 46: ...MEMO...
Page 47: ...MEMO...
