![background image](http://html1.mh-extra.com/html/icom/if22sr/if22sr_instruction-manual_4213811021.webp)
16
3
BASIC OPERATION
New master
D
D
CTCSS FIND
This transceiver can detect the CTCSS tone frequency in the re-
ceived signal. By monitoring a signal that is being transmitted from
the other station, you can determine the tone frequency required to
communicate with them.
This function very useful when you are going to communicate with
unknown CTCSS code number stations. ‘CTCSS FIND’ scans all
of the CTCSS codes, then stops when a tone code is detected.
q
While pushing and holding [S-Ring/C-Ring], [MONI], turn [VOL]
to turn the power ON.
w
Select the desired CH 1 to CH 15 that you want to assign the
CTCSS tone code.
e
Push and hold [S-Ring/C-Ring] until a beep (Pi) is emitted.
• ‘CTCSS FIND’ starts to scan the code.
r
‘CTCSS FIND’ stops when the tone code is detected.
t
Push [S-Ring/C-Ring] to determine the tone code number.
y
Turn the power OFF, and then ON again.
D
D
Turn the squelch function ON/OFF
• Push and hold [MONI] to turn the tone squelch function OFF.
• You can receive any signals on a channel, when you receive
the other group’s signal.
• Push [MONI] to turn ON the tone squelch function again. You
can receive only signals containing the same as your group
code.
IC-F22SR-(1) 02.3.23 2:29 PM Page 21 (1,1)