2
2
PANEL DESCRIPTIONS
n
Front panel
q
POWER SWITCH [POWER]
The power switch for ID-RP4000V.
w
POWER INDICATOR
The LED indicator for the ID-RP4000V and lights
when the power is turned ON.
e
HIGH/LOW POWER SELECT SWITCH [H/L]
Selects the transmit output power High
(approx.
25 W)
and Low
(approx. 2.5 W)
.
r
SERVICE CONNECTOR T [SERVICE T]
(p. 30)
Connect a PC via a USB cable
(A-B type; purchase
separately)
to set the transmit frequency.
t
SERVICE CONNECTOR R [SERVICE R]
(p. 30)
Connect a PC via a USB cable
(A-B type; purchase
separately)
to set the receive frequency.
q w
e r t
n
Rear panel
q
RECEIVE ANTENNA CONNECTOR [RX ANT]
(p. 5)
Connect a 440 MHz band antenna through a du-
plexer.
w
TRANSMIT ANTENNA CONNECTOR [TX ANT]
(p. 5)
Connect a 440 MHz band antenna through a du-
plexer.
e
COOLING FAN
r
POWER CONNECTOR [DC13.8V]
(p. 5)
Connect to the ID-RP2C via the supplied DC power
cable (OPC-1309) to be supplied the DC power.
t
[CONT I/O]
(p. 5)
Connect to the ID-RP2C via the supplied control
cable for received or transmitted serial data com-
munication.
y
GROUND TERMINAL [GND]
(p. 4)
Connect to a ground to prevent electrical shocks,
TVI, BCI and other problems.
q
r
t y
e
w
