26
2001 NEW
26
4
DRIVER INSTALLATION
D
Microsoft
®
Windows Vista
®
q
Start up Windows.
w
Connect the PC and the ID-RP4000V [SERVICE T]
connector through a USB cable.
e
Open the “Device Manager” screen.
• See “
n
COM port confirmation (p 24)
” to open the
“Device Manager” with Microsoft
®
Windows Vista
®
.
r
Click “ ” of Ports (COM&LPT).
Right click the “ICOM ID-RP4000V SERVICE T
(COM
Q
)” , then select “Uninstall”.
t
Click to add the check mark, “
4
,” into “Delete the
driver software for this device.” then click [OK].
y
Right click the “ICOM ID-RP4000V SERVICE
Q
” ,
then select “Uninstall”.
u
Click to add the check mark, “
4
,” into “Delete the
driver software for this device.” then click [OK].
NOTE:
Un-install the USB drivers for ID-RP4000V
[SERVICE R] with the same manner.
Manual un-installation from each unit and connector
is needed when using Microsoft
®
Windows Vista
®
.
In this section, describes the un-installation instruc-
tion with the ID-RP4000V [SERVICE T] for example.
Click
Click
Click
Click
