15
6
INFORMATION
D
[LAN 2]
Connects to a Gateway server when
operating in the LTE mode.
L
An optional LTE unit is required.
About the LED indication:
1
LINK/ACT
• Lights when a cable is connected.
• Does not light when a cable is not
connected.
• Blinks while communicating
2
SPEED
• Lights while communicating in
100BASE-TX.
• Does not light while communicating.
• Blinks while communicating in
10BASE-T, or not connected.
D
[CONT I/O]
Connects to the LAN port of the ID-
RP2C using a supplied control cable,
when the repeater system is operating
as a gateway or assist repeater with
the ID-RP2C.
L
Set [CONT I/O RPT] on the rear panel
to “CONT I/O,” when using this port.
■
Connectors
D
[DC 13.8 V]
Accepts the regulated DC power of
13.8 V DC ±15% through the supplied
DC power cable.
R
WARNING! NEVER
reverse the
DC power cable polarity.
D
[LAN 1]
Connects to a Gateway server when
operating in the Gateway repeater
mode.
About the LED indication:
1
LINK/ACT
• Lights when a cable is connected.
• Does not light when a cable is not
connected.
• Blinks while communicating.
2
SPEED
• Lights while communicating in
100BASE-TX.
• Does not light while communicating.
• Blinks while communicating in
10BASE-T, or not connected.
1 2
1 2
D
Receiver
•Receive system:
ID-RP2010V/ID-RP4010V
ID-RP1200VD
RF direct sampling
Superheterodyne
•Sensitivity:
FM
DV
DD (ID-RP1200VD)
–15 dBµV (0.18 μV) or less (At 12 dB SINAD)
–13 dBµV (0.22 μV) or less (At 1% BER (PN9))
4 dBµV (1.58 μV) or less (At 1% BER (PN9))
•Selectivity:
•Selectivity (ID-RP1200VD):
FM (BW: 15 kHz)
DV
FM (BW: 15 kHz)
FM (BW: 7 kHz)
DV
DD
More than 12.0 kHz/–6 dB, 20 kHz or less/–60 dB
–50 dB or less (Channel spacing=12.5 kHz)
20 kHz or less/–50 dB
10 kHz or less/–50 dB
–40 dB or less (Channel spacing=12.5 kHz)
–40 dB or less (Channel spacing=300 kHz)
•Intermodulation:
ID-RP2010V/ID-RP4010V
ID-RP1200VD
–60 dB or less
–50 dB or less
•Receive spurious:
2 nW (–57 dBm) or less
•Spurious & image rejection:
ID-RP2010V/ID-RP4010V
ID-RP1200VD
More than 55 dB
More than 50 dB
•Audio output power:
More than 2.0 W (1 kHz, 10% distortion into an
8 Ω load)
•AF output impedance:
8 Ω
■
Specifications (Continued)
Summary of Contents for ID-RP2010V
Page 23: ...MEMO...