D-STAR OPERATION
60
D-ST
AR GUIDE
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
D
Linking to a reflector
If your repeater is not currently linked to a reflector, or if you want to change it to another
reflector, follow the steps below. Before linking to another reflector,
BE SURE
to unlink
the current reflector. (p. 59)
Direct inputting a reflector
Example:
Directly enter “REF030CL.”
1. Push D-pad(
) to select “TO,” and then push [ENT].
2. Select “Reflector.”
3. Select “Link to Reflector.”
4. Select “Direct Input.”
5. Push D-pad(
) to move the cursor, and rotate [DIAL] to select the reflector type,
reflector number, or module letter.
6. Push [ENT].
•
Returns to the DR screen, and “Link to Reflector” and entered reflector are displayed in
“TO.”
7. Hold down [PTT] to link to the reflector.
•The TX/RX indicator lights red.
Using the TX History
The TX History saves up to 5 reflectors that your Access repeater linked before.
Example:
Select the “REF030CL” in the TX History.
1. Push D-pad(
) to select “TO,” and then push [ENT].
2. Select “Reflector.”
3. Select “Link to Reflector.”
4. Select the reflector that you want to link to.
•
Returns to the DR screen, and “Link to Reflector” and “REF030CL” are displayed in
“TO.”
5. Hold down [PTT] to link to the reflector.
•The TX/RX indicator lights red.
