![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_basic-manual_3773226036.webp)
23
BASIC MANUAL
5
MEMORY OPERATION
■
Entering Memory channels
The transceiver has a total of 1000 Memory channels to save often-used frequencies.
In the Memory mode, you can quickly select the saved memories. This section describes
the basic channel content entry.
Example:
Entering 146.030 MHz/FM mode into Channel 11 in Group 01.
1. Push [VFO/MHz] to enter the VFO mode.
2. Push [MODE] to enter the FM mode.
3. Rotate [DIAL] to set a frequency to 146.030 MHz.
4. Hold down [MW] for 1 second.
•A short and a long beep sound.
5. Select “Write to New CH.”
6. Push [QUICK].
7. Select “Group Select.”
8. Select Group “01.”
9. Rotate [DIAL] to select Channel “11.”
10. Push [ENT].
•
The confirmation dialog is displayed.
11. Select “YES.”
•
Beeps sound and the Memory contents are briefly displayed, then returns to the
VFO mode.
TIP:
Holding down [MW] for 3 second in step 4 enters the contents
into a blank channel.