5
1
PANEL DESCRIPTION
TALK AROUND
➥
Push to turn the Talk Around function ON or OFF.
•
The Talk Around function equalizes the transmit frequen-
cy to the receive frequency for transceiver-to-transceiver
communication.
DTMF AUTODIAL
➥
Push to transmit the preprogrammed DTMF code.
CALL
➥
Push to transmit a 2-Tone in the operating chan
nel.
CALL A (CODE 1)/CODE B (CODE 2)
➥
Push to transmit a 2-Tone, that is programmed in
channel 1 (Code A) or channel 2 (Code B).
EMERGENCY
➥
Hold down during the Emer SW ON timer period to turn
ON the Emergency function.
• After the Start or Repeat timer period ends, an Emer-
gency call is automatically transmitted once, or repeat-
edly, depending on the presetting.
➥
Hold down during the Emer SW OFF timer period to can-
cel the Emergency function, before transmitting an Emer-
gency call.
SURVEILLANCE
➥
Hold down to turn ON the Surveillance function.
➥
Push to turn OFF the function.
• When this function is ON and a signal is received, a
beep does not sound and the LED does not light, even if
you push any key.
SIREN
➥
Hold down to emit a siren sound.
• This function may use for situations other than an emer-
gency alert, such as a security alarm.
➥
Turning OFF the transceiver power to stop the siren
sound.
COMPANDER
➥
Hold down to turn ON the Compander function.
➥
Push to turn OFF the function.
• The Compander function reduces noise components from
the transmitted audio to provide clear communication.
ANNOUNCE
➥
Push to turn the Channel Announce function ON or OFF.
