Icom IC-V10MR, Operating Manual

Page: 15 / 19

1 2
2
16
15
14
13
12
11
10
9
8
7
6
5
4
3
1
BASIC OPERATION
2
The beep function can be ON or OFF, and its level can be
adjusted between 1 and 5, or 1 (linked) and 5 (linked). When a
Linked option is selected, the beep level is adjustable by
[VOL].
Rotate
q
[VOL] to turn the transceiver power OFF.
Set
w
[ROTARY SELECTOR] to any channel other than
Channel 16.
While holding down
e
[Lower], rotate [VOL] to turn ON the
power and enter the beep level adjustment mode.
Turn the beep function ON or OFF by pushing
r
[Lower].
When a beep sounds after pushing [Lower], the beep
function is ON. When no beep sounds after pushing
[Low-
er], the beep function is OFF.
Push
t
[Upper] to change the beep level. Repeatedly push-
ing [Upper] first selects 1(lowest) to 5 (highest), and then
selects the lowest linked level, 1(Linked) to the highest, 5
(Linked).
• The adjustable range is 1 to 5 or 1 (Linked) to 5 (Linked).
• If the level is set at 1 to 4, pushing
[Upper] increases the level. If the
level is at 5, pushing
[Upper] selects the linked levels, starting with
1 (Linked). If the level is at 1 (Linked) to 4 (Linked), pushing
[Upper]
increases the level. If the level is at 5 (Linked), pushing
[Upper] re-
turns the level to 1. Repeatedly pushing
[Upper] repeats the cycle.
• A beep sounds after pushing
[Upper]. Therefore, you can de-
termine the current level setting by the increasing loudness of
the beep that sounds.
• To determine if you have selected a linked level, set [VOL] to
minimum, then push [Upper] up to 10 times, listening for the
loudest beep (level 5). Pushing [Upper] once after the loudest
beep will select 1 (Linked). Repeatedly push [Upper] to select
the desired linked level. You can easily hear a level you have set
by repeatedly pushing
[Lower].
Rotate
y
[VOL] to turn the power OFF, then ON again to exit
the beep level adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Upper]
[Lower]
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
Turn OFF
the Beep
function
[Upper]
operation
[Lower]
operation
■
Setting the Beep function and level
NOTE:
This operation may not be
selectable, depending on
the presetting. Ask your
dealer for details.