![background image](http://html1.mh-extra.com/html/icom/ic-u82/ic-u82_instruction-manual_2038116039.webp)
27
7
DTMF MEMORY
6
7
■
Programming a DTMF code sequence
The transceiver has 16 DTMF memory channels (d0 to dF)
for storage of often-used DTMF code sequence of up to 24
digits. DTMF memories are used to store phone numbers or
control codes.
q
Push [A•
FUNC
], then push [0•
OPT
] to enter
OPTION SET MODE
.
• Rotate [VOL] to select “dtm.OF,” if necessary. Or when an op-
tional UT-118
DIGITAL UNIT
is installed, push [
Y
Y
] or [
Z
Z
] several
times until “dtm.OF” appears.
w
Push and hold [0•
OPT
] for 1 sec. to select the DTMF memory.
• One of “d0” to “dF” appears.
e
Rotate [VOL] to select the desired DTMF memory.
r
Push and hold [0•
OPT
] for 1 sec. to enter the DTMF pro-
gramming mode.
• “_ _ _ _ _” appears.
• Programmed memories can be cleared in this way.
t
Enter the desired DTMF code sequence by pushing the
digit keys, [A•
FUNC
], [B•
CALL
], [C•
MR
], [D•
CLR
], [#•
BANK
]
and [
✱
•
ENT
], in the desired sequence.
• A maximum of 24 digits can be input.
• [
✱
•
ENT
] enters tone “E”, [#•
BANK
] enters tone “F.”
• If a digit is mistakenly input, push [MONI] or [PTT] momentarily
then repeat from step
q
.
y
Push [MONI] or [PTT] to save the digits and exit the DTMF
programming mode.
• Programmed DTMF code sequence sounds when [MONI] is
pushed.
• Or after 24th digit is input, the transceiver automatically saves
the digits and returns to step
w
.
CALL
DUP
SCAN
PRIO
ENT
SET
H/M/L
OPT
SKIP
BANK
TONE
T.SCAN
P.BEEP
MR
CLR
FUNC
9
8
7
4
1
2
3
A
B
D
C
5
6
0
OPT
0
Push
for 1 sec.
OPT
0
Push
for 1 sec.
FUNC
A
OPT
0
Push