![background image](http://html1.mh-extra.com/html/icom/ic-u82/ic-u82_instruction-manual_2038116037.webp)
25
6
MEMORY/CALL OPERATION
6
■
Memory bank selection
The IC-V82/U82 has a total of 10 banks (A to J). Each mem-
ory channel, 0 to 199, may be assigned to one of the banks
for easy memory management.
q
Push [C•
MR
] to select memory mode.
w
Push [A•
FUNC
] and [#•
BANK
] to enter
memory bank selection.
• Bank indicator blinks.
e
Rotate [VOL] to select the desired
bank, A to J.
• Banks that have no programmed con-
tents are skipped.
r
Push [
✱
•
ENT
] (or [D•
CLR
]) to se-
lect the bank.
• Indicator stops blinking.
t
Push [
Y
Y
] or [
Z
Z
] to select the channel in the bank.
• No channel numbers are displayed for memory bank operation.
y
To return to regular memory condition, push [A•
FUNC
] and
[#•
BANK
] to enter memory bank mode, then push
[
✱
•
ENT
] (or [D•
CLR
]).
■
Memory bank setting
q
Push [C•
MR
] to select memory mode, then select the de-
sired memory channel via [
Y
Y
] or [
Z
Z
].
w
Push [A•
FUNC
] and [8•
SET
] to enter
SET MODE
.
e
Push [
Y
Y
] or [
Z
Z
] several times until
“bAk” appears.
• “– –” indication blinks as follows.
r
Rotate [VOL] to select the desired
bank.
t
Push [
✱
•
ENT
] (or [D•
CLR
]) to assign the channel to the
bank and return to regular memory condition.
y
Repeat steps
q
to
t
to assign another memory channel
to the same or another bank.
NOTE: Display type setting (pgs. 16, 65) in
INITIAL SET
MODE
must be selected “FR,” otherwise the memory bank
operation cannot be performed.
[VOL]
ENT
FUNC
A
SET
8
MR
C
Push
[VOL]
ENT
FUNC
A
BANK
MR
C
Push