![background image](http://html1.mh-extra.com/html/icom/ic-u80/ic-u80_instruction-manual_2038107057.webp)
■
Resetting
The LCD may occasionally display erroneous infor-
mation (e.g. when first applying power). This may be
caused by external static electricity or by other factors.
If this problem occurs, turn OFF the power. After wait-
ing a few seconds, turn ON the power again. If the
problem persists, perform either or both of the proce-
dures below.
D
Partial reset
If you want to reset the operating settings (VFO fre-
quency, VFO settings, and Set modes contents) with-
out clearing the memory contents, use the partial reset.
q
Hold down
[
] for 1 second to turn OFF the power.
w
While holding down
[VFO/MR/CALL], hold down [
] for 1
second to turn ON the power.
NOTE: No message appears on the display after the par-
tial reset is completed.
D
All reset
The All reset clears all programming and returns all
settings to their factory defaults.
q
Hold down
[
] for 1 second to turn OFF the power.
w
While holding down
[MONI] and [VFO/MR/CALL], hold
down
[
] for 1 second to turn ON the power.
• “CLEAR” appears when resetting the CPU.
CAUTION: The All reset returns all programmed contents
to their default settings.
12
RESETTING
1
2
3
4
5
6
7
8
9
10
11
14
15
16
17
18
19
51
12
13