![background image](http://html1.mh-extra.com/html/icom/ic-u80/ic-u80_instruction-manual_2038107012.webp)
6
2
PANEL DESCRIPTION
New2001
New2001
■
Function display
q
BUSY ICON
➥
Appears when a signal is being received, or the squelch
is open.
➥
Blinks while the monitor function is ON. (p. 15)
w
SIGNAL ICONS
➥
Shows the strength of the received signal. (p. 18)
➥
While transmitting, shows the output power level. (p. 19)
e
TONE ICONS
➥
“ ”: While the repeater tone encoder is ON. (p. 21)
➥
“ ”: While the tone squelch function is ON. (p. 34)
➥
“
D
”: While the DTCS squelch function is ON. (p. 34)
➥
“
D
” and “ ”: While the DTCS encoder is ON. (p. 34)
➥
“ ” and “ ” or “
D
”: While the pocket beep function (with
CTCSS or DTCS) is ON. (p. 34)
r
MEMORY ICON
Appears when the memory mode is selected.
(pp. 16, 25)
t
FREQUENCY READOUT
➥
Displays the operating frequency, memory channel, Set
modes contents and a variety of other information.
• The decimal point blinks during scan.
➥
During memory mode operation, the programmed
memory name is displayed.
y
BATTERY ICONS (p. 14)
➥
“
” (battery icons) appear when the battery pack or
case is attached.
➥
“ ” appears when the battery is nearing exhaustion.
Charging the battery pack, or replacing the batteries in
the case is necessary.
u
KEY LOCK ICON
Appears when the Key Lock function is ON.
(p. 18)
i
VOX ICON
Appears when the VOX function is ON.
(p. 55)
Weak
�
RX Signal level
�
Strong
Low
Mid
High
u
i
o
q w e
r
y
t
!5
!4
!3
!1
!2
!0