![background image](http://html1.mh-extra.com/html/icom/ic-u20sr/ic-u20sr_basic-manual_4733594008.webp)
7
2
PANEL DESCRIPTION
BASIC MANUAL
■
Function display
1
TX ICON
Displayed while transmitting.
2
ANTENNA ICON
z
Displayed while the channel is busy
(receiving).
z
Blinks while the monitor function is
turned ON.
3
SIGNAL STRENGTH INDICATOR
Displays the relative receive signal
strength level.
4
SCAN ICON
z
Displayed when the channel is
selected as a scan target channel.
z
Blinks while scanning.
5
VOX ICON
Displayed when the VOX function is ON.
6
KEY LOCK ICON
Displayed when the Key Lock function is
ON.
7
BATTERY INDICATOR
z
Blinks while charging.
z
Displays the remaining battery
charge.
Indication
*
Battery
Status
Full Mid Charging
required
Battery
exhausted
* Blinks when the battery charge
decreases to a set level.
8
ALPHANUMERIC READOUT
Displays messages such as channel
number.
CAUTION: DO NOT
use the transceiver
without the connector covers or the
optional equipment attached.
The transceiver meets IP54 requirements
for dust-tight and splash resistance only
when the connector covers or the optional
HM-183LS is attached.
1
2 3 4
5
6
7
8
Factory default key assignment
[Side]
z
Push to make a Smart-Ring call.
z
Hold down to make a Call-Ring call.
[Top]
z
Hold down for 2 seconds to enter the Emergency mode.
z
Hold down for 1 second to exit the Emergency mode.
NOTE:
If a user holds down [Emergency] for the Emer SW OFF Timer set
time before the Reminder Timer expires, the Emergency mode is canceled.