![background image](http://html1.mh-extra.com/html/icom/ic-u20sr/ic-u20sr_basic-manual_4733594011.webp)
10
BATTERY CHARGING
3
BASIC MANUAL
1
2
3
1
2
3
ENGLISH
■
Battery charging
•Fully charge the transceiver before
using it for the first time, or if it has not
been used for more than 2 months. The
charger automatically restarts charging
when the battery voltage drops.
•Disconnect the AC adapter from the outlet
when not charging the battery.
•Use the supplied USB cable.
•The battery icon on the function display
blinks while charging and lights when the
charging has been completed.
D
Charging directly
Connect the supplied USB cable to the
[USB] connector.
Charging time:
Approximately 5.5 hours with 5 V/1 A input
NOTE for charging with a USB cable:
•Use a 5 V/1 A output AC adapter.
•USB Power Delivery (USB PD) is not
supported.
•The charging time may differ, depending
on the current. When you use a lower
than 1 A output AC adapter or PC, it may
take longer to charge, or the battery may
not be charged.
•Before using the AC adapter, thoroughly
read its instructions.
To an AC adapter or a PC
(User supplied)
Turn OFF
USB
Type-C
USB cable
To the [USB] connector
NOTE:
If “Q ER” is displayed, a charging
error has occurred.
•Disconnect the USB cable or AC
adapter, and then connect properly.
•Properly install the battery pack to the
transceiver.
•Properly insert the transceiver into the
charging cradle.
•Charge the battery pack within the
specified temperature range: 15°C ~
40°C.
D
Charging on the cradle
Turn OFF
USB cable
USB Type-C
Charging cradle
Tabs
Guide rails
NOTE:
Be sure the tabs on the
transceiver are correctly aligned with the
guide rails inside the cradle.