Icom IC-T3H, Instruction Manual

Page: 49 / 68

42
10
PAGER/CODE SQUELCH
■
Pager operation
D
Calling a specific station
q
Program the desired code channel in advance (p. 40).
w
Set the operating frequency.
• Set the AF and squelch to the desired level as in normal operation.
e
Push [A•
FUNC
], then push [
✱
•
OPTION
].
• Pager mode is selected.
• 100 MHz digit shows “P.”
r
Select the desired transmit code channel:
➥
Push [A•
FUNC
], then push [8•
SET
].
➥
Rotate [VOL] to select the desired code channel.
➥
Push [#•
ENT
] to return to previous condition.
t
Push [PTT] to transmit the pager code.
y
Wait for an answer back.
• When the transceiver receives an answer back code, the function
display shows the other member’s ID or group code.
u
After confirming a connection, push [A•
FUNC
], then push [
✱
•
OP
-
TION
] to select the code squelch operation, or repeat the previous
key operation again to select non-selective calling system.
• DO NOT push any digit keys while code channels C0 to C6 are dis-
played, or code channel contents will be changed.
i
Communicate with the other party as normal: push [PTT] to
transmit; release to receive.
Optional UT-108 required
MR
F
TX
IC-T3H.qxd 03.2.6 10:18 Page 42 (1,1)