Icom IC-T3H, Instruction Manual

Page: 38 / 68

31
8
SCAN OPERATION
■
Memory (skip) scan
Memory scan repeatedly scans all programmed memory chan-
nels, except those set as
skip channels.
q
Push [C•
MR
] to select memory mode, if necessary.
• “
X
” appears.
w
Push [A•
FUNC
], then push [5•
SCAN
] to start the scan.
• To change the scan direction, push [
Y
] or [
Z
].
• When “dial” is assigned [VOL], rotate [VOL] to change the scan di-
rection. (p. 50)
e
Push [D•
CLR
] to stop the scan.
D
Setting skip channels
In order to speed up the scan interval, you can set memory
channels you don’t wish to scan as skip channels.
q
Push [C•
MR
] to select memory mode, if necessary.
• “
X
” appears.
w
Select a memory channel to set as a skip channel.
e
Push [A•
FUNC
], then push [6•
SKIP
] to toggle the skip setting ON
and OFF.
• “SKIP” appears when the channel is set as a skip channel.
IC-T3H.qxd 03.2.6 10:18 Page 31 (1,1)