SPECIFICATIONS AND OPTIONS
18
6
The transceiver can operate with Bluetooth headsets.
The communication range of Bluetooth is
approximately 10 meters (33 ft).
Bluetooth
®
NOTE:
The Bluetooth communication range may
vary, depending on the environment where you
operate the device.
Electromagnetic Interference
When you use a Bluetooth device, pay attention to the
following:
Bluetooth devices operate in the 2.4 GHz band. The
2.4 GHz band is also used by other devices, such
as Wireless LAN products, microwave ovens, RFID
systems, amateur radio stations, and so on.
When using this device near such devices,
interference may occur, causing a decrease in
communication speed, and an unstable connection.
In such cases, use this device away from the other
devices, or stop using those devices.
Pairing with a headset
You can pair a maximum of 4 Bluetooth headsets to
the transceiver.
These instructions describe pairing with the VS-3
Bluetooth
®
headset, as an example.
1. Turning ON the transceiver’s Bluetooth function
1. Select “Bluetooth ON/OFF,” in the Menu screen,
and then push [OK].
[OK] > Bluetooth >
Bluetooth ON/OFF
2. Select “ON,” and then push [OK] to turn ON the
Bluetooth function.
3. Hold down [BACK] for 1 second to exit the Menu
screen.
• “ ” is displayed.
2. Entering the VS-3 Pairing mode
1. Confirm the VS-3 is turned OFF.
2. Hold down [ ] for 6 seconds.
• The LED alternatively blinks red and blue, and then
the headset enters the Pairing mode.
3. Pairing and connecting the Bluetooth headset
1. Select “Find Device,” and then push [OK].
[OK] > Bluetooth > BT Device List >
Find Device
2. Select “Headset,” and then push [OK].
• The transceiver searches for a headset.
Push [BACK] to cancel searching.
3. Select the headset to pair and connect, and then
push [OK].
A passkey or PIN code may be required to pair,
depending on the headset. Refer to your headset or
device’s instructions for details.
4. Hold down [BACK] for 1 second to exit the Menu
screen.
• “ ” is displayed if the headset or device is correctly
connected.
Disconnecting a paired device
You can disconnect a paired Bluetooth device if it is
not being used.
1. Select “BT Device List,” and then push [OK].
[OK] > Bluetooth >
BT Device List
2. Select the device to disconnect, and then push
[OK].
3. Select “Disconnect,” and then push [OK].
4. Hold down [BACK] for 1 second to exit the Menu
screen.
• “ ” is displayed if the headset or device is correctly
disconnected.
Deleting a headset
Disconnect a connected headset before deleting it.
1. Select “BT Device List,” and then push [OK].
[OK] > Bluetooth >
BT Device List
2. Select the headset to delete, and then push [OK].
3. Select “Delete,” and then push [OK] to delete the
headset.
4. Hold down [BACK] for 1 second to exit the Menu
screen.
Bluetooth headset
(Example: Optional VS-3)
Using a Bluetooth
®
headset
