CONNECTING AND MAINTENANCE
14
5
1. Remove the cover attached to the LAN cable.
2. Insert it into the antenna cable.
3. Attach the cover attached to the LAN cable as
shown.
LAN cable with
antenna unit
Supplied LAN cable
4. Connect to the gray LAN cable with the main unit.
Information
When the transceiver is connected to network devices, change the static IP address.
Before using the transceiver, enter a static IP address for the antenna unit and the main unit.
Ask your dealer for details.
Default
IP address:
192.168.0.1(Main Unit )
192.168.0.2(Antenna Unit)
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.0.254
Connect the antenna unit and the LAN cable
Connect the main unit and the supplied LAN cable as describe below.
You can also connect a user supplied LAN cable up to 100 m.
Supplied
LAN cable
Gray LAN cable
of
the main unit
After connecting the Antenna cable and the LAN
cable, wrap the connectors with rubber vulcanizing
