![background image](http://html1.mh-extra.com/html/icom/ic-rx7/ic-rx7_service-manual-addendum_3638041035.webp)
3 - 1
1. Removing the front panel
q
Unscrew 4 screws from the rear panel.
2. Removing the LOGIC UNIT
q
Unscrew total of 4 screws from the LOGIC UNIT.
w
Unsolder 3 points at the rotary encoder (CONTROL
DIAL), then remove the LOGIC UNIT from the rear panel.
3. Removing the MAIN UNIT
q
Unscrew 5 screws from the MAIN UNIT
w
Unsolder 1 point at the bottom of antenna conector, then
remove the MAIN UNIT from the rea panel.
SECTION 3. DISASSEMBLY
INSTRUCTION
Rear panel
4 screws
2 screws
2 screws
Rear panel
LOGIC UNIT
Unsolder
Unscrew×5
Antenna connector
Unsolder
MAIN UNIT
w
Release the both sides of notches, and remove the front
panel.
Summary of Contents for IC-RX7
Page 1: ...SERVICE MANUAL ADDENDUM CONTENTS PARTS LIST 1 BOARD LAYOUTS 8 VOLTAGE DIAGRAM 10 Feb 2010...
Page 16: ...SERVICE MANUAL ADDENDUM CONTENTS REPLACEMENT PAGE 6 1 PARTS LIST 1 VOLTAGE DIAGRAM 8 Feb 2009...
Page 30: ...S 14510XZ C1 Aug 2008 WIDEBAND RECEIVER...
Page 64: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan S 14510XZ C1 2008 Icom Inc...