5
MEMORY OPERATION
25
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push [VFO/MR•S.MW] to select VFO mode in the main
band.
w
Push the same band’s [VFO/MR•S.MW] for 1 sec. to enter
select memory write mode.
• “
!
” indicator and the memory channel number blink.
e
Rotate the same band’s [DIAL] to select the memory
channel to be cleared.
• Memory channels not yet programmed are blank.
r
Push [SET•SKIP] three times to select “CLEAR,” then
push and hold [VFO/MR•S.MW] for 1 sec.
• 3 beeps sound.
• The cleared channel changes to blank channel
• “
!
” and the memory channel number blink continuously.
t
Push the same band’s [MAIN] or [MHz•TS] to exit select
memory write mode, or repeat steps
e
and
r
to clear
other channel.
y
Push the same band’s [VFO/MR•S.MW] to return to VFO
mode.
☞
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO.
Rotate for selecting memory channel.
Push for 1 sec.
S.MW
VFO/MR
S.MW
VFO/MR
S.MW
VFO/MR
Push any switch for main band
other than , then push to return to VFO.
S.MW
VFO/MR
S.MW
VFO/MR
Push three times, then push for 1 sec.
SET
SKIP
Beep
Beep
Beep
“
“
“
“
“
■
Memory clearing
