21
5
MEMORY OPERATION
[EXAMPLE]: Programming “CLUB” into memory channel 12.
Select
memory channel
Push for 1 sec.
Rotate
Push for 1 sec.
Beep
Beep
Beep
“
“
“
“
“
S.MW
VFO/MR
S.MW
VFO/MR
S.MW
VFO/MR
Push twice
SET
SKIP
Repeat the
previous
steps.
Each memory channel can be programmed with an alphanu-
meric channel name for easy recognition and can be indicated
independently by channel. Names can be a maximum of 6
characters— see the table on next page for available charac-
ters.
q
Select the desired memory channel to be programmed.
➥
Push [VFO/MR•S.MW] to select memory mode, then ro-
tate [DIAL] to select the desired memory channel.
w
Push and hold [VFO/MR•S.MW] for 1 sec. to enter select
memory write mode.
• “
!
” indicator and the memory channel number blink.
e
Push [SET•SKIP] several times to select the memory
name programming condition, “m nAmE.”
• Frequency readouts disappear and a cursor blinks.
r
Rotate [DIAL] to select the desired character.
• The selected character blinks.
t
Push [ATT•PRIO] to move the cursor to the right.
• Repeat pushing [ATT•PRIO] to return to the first digit.
y
Repeat steps
r
and
t
until the desired channel names
are displayed.
u
Push and hold [VFO/MR•S.MW] for 1 sec. to program the
name and exit select memory write mode.
■
Programming channel names
