![background image](http://html1.mh-extra.com/html/icom/ic-m85/ic-m85_instruction-manual_2038029029.webp)
24
10
SPECIFICATIONS AND OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
IC-M85E (European/UK/German/Dutch/Australian):
D
General
•Frequency coverage:
Marine
TX
156.000 ~ 161.450 MHz
RX
156.000 ~ 163.425 MHz
TX (Australian) 156.025 ~ 157.425 MHz
RX (Australian) 156.300 ~ 162.025 MHz
PMR
136.000 ~ 174.000 MHz
•Mode:
Marine
16K0G3E
PMR
16K0F3E (Wide)/8K50F3E (Narrow)
PMR (German/Dutch)
14K0F3E (Wide)/8K50F3E (Narrow)
•Channel spacing:
Marine
±25 kHz
PMR
±25 kHz (Wide), ±12.5 kHz (Narrow)
PMR (German/Dutch)
±20 kHz (Wide)
, ±12.5 kHz (Narrow)
•Current drain (at 7.2 V DC): TX High (5 W) 1.5 A typical
Maximum audio 450 mA typical
•Frequency stability:
European/UK/German/Dutch
±1.5 kHz
Australian
±5.0 ppm (Marine), ±1.5 kHz (PMR)
•Operating temperature range:
Marine
–15˚C ~ +55˚C
PMR
–25˚C ~ +55˚C
Marine (Australian)
–10˚C ~ +55˚C
PMR (Australian)
–10˚C ~ +50˚C
•
Dimensions (projections not included):
56 (W) × 92 (H) × 29 (D) mm
•
Weight (approximately):
215 g with BP-290
•Antenna impedance:
50
˘
nominal
D
Transmitter
•Output power:
5 W (Hi), 3 W (Mid), and 1 W (Low)
•Modulation system :
Variable reactance frequency modulation
•
Maximum frequency deviation:
Marine
±5
kHz
PMR
±5 kHz (Wide), ±2.5 kHz (Narrow)
PMR (German/Dutch)
±4 kHz (Wide), ±2.5 kHz (Narrow)
•Audio harmonic distortion: Less than 10% (at 60% deviation)
•Spurious emissions:
European/UK/German/Dutch 0.25 μW (below 2 GHz)
1 μW (above 2 GHz)
Australian
Less than –70 dBc typical
D
Receiver
•Receive system:
Double conversion superheterodyne
•
Sensitivity (at 20 dB SINAD): –4 dBμ EMF (Wide, Typical)
–2 dBμ EMF
(Narrow, Typical, PMR only)
•Squelch sensitivity (Threshold):
–6 dBμ EMF (typical)
•
Intermodulation rejection ratio:
European/UK/German/Dutch
68 dB (Marine), 65 dB (PMR)
Australian
65 dB
•
Sprious response rejection ratio:
European/UK/German/Dutch
70 dB
Australian
65 dB (Marine), 70 dB (PMR)
•
Adjacent channel selectivity:
European/UK/German/Dutch
70 dB, 60 dB (Narrow, PMR only)
Australian (Marine)
65 dB
Australian (PMR)
70 dB (Wide), 60 dB (Narrow)
•Ham and Noise ratio:
40 dB
34 dB (Narrow, PMR only)
•Audio output power:
0.7 W typical at 10% distortion into a
12
˘
load (at 1 kHz)