manualshive.com logo in svg

Icom IC-M73, Instruction Manual, Page: 7 / 56

Share
Download
Icom IC-M73 Instruction Manual Download Page 7

vi

New2001

IN CASE OF EMERGENCY

If your vessel requires assistance, contact other vessels 
and the Coast Guard by sending a distress call on Chan-
nel 16.

❍ 

USING CHANNEL 16

DISTRESS CALL PROCEDURE

1. “MAYDAY MAYDAY MAYDAY.”

2. “THIS IS  ..........................” (name of vessel)

3.  Say your call sign or other indication of 

the vessel.

4. “LOCATED AT  ................... ” (your position)

5.  State the nature of the distress and 

assistance required.

6.  Give any other information which might 

facilitate the rescue.

RECOMMENDATION

 after exposure to saltwater, and dry it before operation. 
Otherwise, the transceiver’s keys, switches and controllers 
may become inoperable due to salt crystallization.

 wash the transceiver in water if there is any reason to sus-
pect the waterproofing may not be effective. For example, 
in cases where the transceiver/battery pack is cracked or 
broken, or has been dropped, or when the battery pack is 
detached from the transceiver.

Summary of Contents for IC-M73

























































Reviews:

No comments