background image

18

7

FUNCTION MODE OPERATION

New2001

You can record the received signal whenever you want by 
using the manual recording function.
This function can record the received signal for maximum 
30 seconds. 

   The transmitted signal cannot be recorded.
   The previously recorded signal will be overwritten when you 

record the next audio using this function.

e

q e

Pushe[F[etoeenterethee
functione

mode,e

ande thene pushe [[[/
[[[e toe selecte thee
manualerecordinge
function.

  • “M-REC” appears.

e

w e

Pushe

[H/L•LOCK[e

toe

starterecording.

  • “REC” appears.

 

•  When  the  signal  disappears,  the 

transceiver continues recording 
without audio.

e

e Pushe[F[etoestopethee
recording.

 

•  The  recording  will  automatically 

stop after 30 seconds.

Manual recording
mode appears.

“REC”  appears 
while recording.

• Example— Manual recording
[Less than 30 seconds]

[More than 30 seconds]

Example: 20 seconds

30 seconds

When  receiving  a  signal  for  30 
seconds  or  less,  this  function 
records all contents.

30  seconds  after  you  start  the  manual  recording,  the 
recording will automatically stop.

These contents
will not be recorded.

Start manual
recording.

Start manual
recording.

Stop manual
recording.

Automatically stops
recording.

  Manual recording function (Depending on versions)

Summary of Contents for IC-M73

























































Reviews: