Icom IC-M73 Page 39 Instruction Manual Download | Manualshive

Page: 39 / 56

background image

31

9

BATTERY CHARGING

New2001

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

■

Battery cautions

Misuse of Lithium-ion batteries may result in the follow-
ing hazards: smoke, fire, or battery rupture.
Misuse can also cause other battery damage or degrada-
tion of battery performance.

•

R

DANGER!

Use and charge only specified Icom battery

pack with Icom transceiver. Only Icom battery pack is
tested and approved for use with Icom transceiver. Us-
ing third-party or counterfeit battery packs may cause
smoke, fire, or cause the battery to burst.

D

Battery caution

•

R

DANGER! DO NOT

hammer or otherwise impact the

battery. Do not use the battery if it has been severely im-
pacted or dropped, or if the battery has been subjected
to heavy pressure. Battery damage may not be visible on
the outside of the case. Even if the surface of the battery
does not show cracks or any other damage, the cells in-
side the battery may rupture or catch fire.

•

R

DANGER! NEVER

use or leave battery pack in areas

with temperatures above +60˚C (+140˚F). High tempera-
ture buildup in the battery, such as could occur near fires
or stoves, inside a sun-heated car, or by setting the bat-
tery in direct sunlight may cause the battery to rupture
or catch fire. Excessive temperatures may also degrade
battery performance or shorten battery life.

•

R

DANGER! DO NOT

expose the battery to rain, snow,

seawater, or any other liquids. Do not charge or use a
wet battery. If the battery gets wet, be sure to wipe it dry
before using. The battery by itself is not waterproof.

•

R

DANGER! NEVER

incinerate a used battery pack since

internal battery gas may cause a rupture or explosion.

•

R

DANGER! NEVER

solder the battery terminals, or

NEVER

modify the battery pack. This may cause heat

generation, and the battery may rupture, emit smoke or
catch fire.

•

R

DANGER!

Use the battery only with the transceiver for

which it is specified. Never use a battery with any other
equipment, or for any purpose that is not specified in this
instruction manual.

•

R

DANGER!

If fluid from inside the battery gets in your

eyes, blindness can result. Rinse your eyes with clean
water, without rubbing them, and see a doctor immedi-
ately.

•

R

WARNING!

Immediately stop using the battery if it

emits an abnormal odor, heats up, or is discolored or de-
formed. If any of these conditions occur, contact your
Icom dealer or distributor.

•

R

WARNING!

Immediately wash, using clean water, any

part of the body that comes into contact with fluid from
inside the battery.

«
...
37
38
39
40
41
...
»

Summary of Contents for IC-M73

























































Reviews:

No comments

Related manuals for IC-M73

Brand: Garmin Pages: 2

Brand: Navman Pages: 52

Brand: Bush Pages: 9

IC-F9511 P25/HT

Brand: Icom Pages: 87

Brand: Uniden Pages: 12

Brand: Albrecht Pages: 9

Brand: Numaxes Pages: 32

Brand: Intaride Pages: 4

Brand: Lafayette Pages: 38

Brand: Acoustic Research Pages: 20

Brand: Kompernass Pages: 20

Twintalker 9500 Airsoft Edition

Brand: Topcom Pages: 148

Brand: Kirisun Pages: 22

Brand: Kirisun Pages: 47

Brand: Federal Signal Corporation Pages: 12

PA300 Series 690009

Brand: Federal Signal Corporation Pages: 20

Brand: Roth Pages: 12

Brand: mbeat Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands