![background image](http://html1.mh-extra.com/html/icom/ic-m71/ic-m71_instruction-manual_2038000016.webp)
10
4
BASIC OPERATION
New2001
n
Call channel programming
The call channel key s used to select Channel 16 by default
(dependng on versons)
, however, you can program your most
often-used channel n each channel group for quck recall.
q
Push and hold
[DIAL]
for 1 sec. several tmes to select
the desred channel group
(INT, USA, CAN, ATIS)
to be pro-
grammed.
w
Push and hold
[16•C]
for 1 sec. to se-
lect the call channel.
• “CALL” and call channel number appear.
e
Push and hold
[16•C]
agan for 3 sec.
(untl a long beep changes to 2 short
beeps)
to enter call channel program-
mng condton.
• Call channel number to be programmed
blnks.
r
Push
[
Y
]/[
Z
]
to select the desred
channel.
t
Push
[16•C]
to program the dsplayed
channel as the call channel.
• The call channel number stops blnkng.
n
Lock function
Ths functon electroncally locks all keys
(except for
[PTT]
,
[
]
and
[H/L•LOCK]
)
to prevent accdental channel changes and
functon access.
➥
Push
[H/L•LOCK]
for 1 sec. to turn the lock functon ON
or OFF.
Push
for 1 sec.
Appears while the lock
function is in use.
n
Monitor function
The montor functon releases the nose squelch mute to
check the volume level. See p. 19 for detals of the montor
swtch acton.
➥
Push and hold
[
]
for 1 sec. to actvate the montor func-
ton.
• “
” and “
” appear and audo s emtted.
Push
for 1 sec.
Appears while the
monitor function is
in use.