![background image](http://html.mh-extra.com/html/icom/ic-m59/ic-m59_instruction-manual_612849018.webp)
4
DIGITAL SELECTIVE CALLING
14
■
All ships call transmission
Large ships use channel 70 as their “listening channel.” When
you want to announce a message to these ships, use the “all
ships call” function.
➀
Select a simplex channel for
the traffic channel (for voice
communication after sending
the all ships call).
• Some ‘A’ channels (eg. channel 88A) cannot be used.
➁
Rotate [SQUELCH] clockwise until the audio noise disap-
pears.
➂
While pushing [
9
•ALL/IND] ro-
tate the channel selector to se-
lect “ALL” as at right.
➃
Push and hold [
9
•ALL/IND]
until you hear 4 short beeps
change to one long beep.
• The display changes as at right.
➄
Push [PTT] momentarily to
transmit the all ships call.
• After transmission, the channel
set in step
➀
above is selected.
USA
LOW
USA
LOW
USA
USA
LOW
USA
T X
➅
Push and hold [PTT] again to send an announcement to
all ships.
NOTE:
Channel busy
When channel 70 is busy, the
all ships call is not transmit-
ted. The transceiver waits
until the channel is clear, then
transmits the call automati-
cally.
NOTE:
Error indication
When a transmission inhibited
channel (e.g. ch 70) is se-
lected for the traffic channel,
the display at right appears. In this case, an appropriate
channel must be selected.
This display may also appear if [9•ALL/IND] is accidentally
released early while being pushed and held in step
➂
.
LOW
USA
BUSY
This display appears
while the call is in
standby.
LOW
USA