77
10
MENU SCREEN
COMMANDMIC SP
Select the speaker to be used.
z
Internal Speaker
Outputs audio from a command
microphone’s speaker.
z
External Speaker
Outputs audio from an external speaker
connected to a command microphone.
RX Hailer
Set the RX Hailer function.
L
Noise Cancel
The Noise Cancel function reduces random
noise components in the received or
transmitted signal. Set the function for both
receiving and transmitting.
z
RX
OFF:
The Noise Cancel function is OFF.
Low: Reduces random noise
components in the received signal
to approximately one half.
Middle:
Reduces random noise
components in the received signal
to approximately one third.
High:
Reduces random noise
components in the received signal
to approximately one tenth.
z
TX/Intercom/Hailer
ON:
Reduces random noise
components in the transmitted
signal to approximately one third.
OFF:
The Noise Cancel function is OFF.
Power Switch
Select whether or not to turn OFF the
transceiver at the same time that you turn
OFF the command microphone.
z
All Units
When you turn OFF the command
microphone, the transceiver is turned
OFF at the same time.
z
Own Unit
The transceiver is not turned OFF
even if you turn OFF the command
microphone.
Controller
Configure the settings for controllers.
L
For more details, see page 49.
z
Name
Enter a name of up to 10 characters for
each controller.
z
Priority
Select which controller to be used as the
Priority Controller.
z
DSC Operation
Set whether or not to accept DSC
remote control from the controllers
connected to the transceiver .
z
ID
The unique ID of each controller is
displayed.
The Priority Controller' ID is automatically
set to 0.
Model
(For only the EUR version)
Select the country where you operate the
transceiver.
L
After select the country, “The Settings are
reset. Are you sure?” is displayed. Push
to return to the Configuration screen.
D
Settings
