![background image](http://html1.mh-extra.com/html/icom/ic-m510bb/ic-m510bb_instruction-manual_4733540055.webp)
42
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
■
Multiple-task mode
(For only the USA version, depending on the presetting)
If the Multiple-task function is enabled, the transceiver can hold up to 7 tasks. You can
handle more than 2 DSC tasks simultaneously by switching between the tasks. To use
the Multiple-task mode, select “Multiple” in the “Procedure” on the Menu screen. (p. 45)
[MENU] > Settings > DSC >
Procedure
When the Multiple-task mode is activated,
is displayed on the operating screen.
NOTE:
The Task mode has a Inactivity Timer function. After a certain period of time has
passed without any operation on a task, the transceiver automatically deletes a task
and returns to the operating screen.
When a Inactivity Timer activates, an alarm sounds and a count down message is
displayed for 10 seconds.
D
Holding a DSC task
In the Multiple-task mode, you can hold or activate the DSC task as follows.
Example: When a Group call is received:
1. Push
to turn OFF the alarm.
•The received call’s information is displayed.
2. Push
.
•The received Group call task is held into the
task list and returns to the operating screen.
D
Activating the held DSC task
1. Push
to display the task list.
•The task list is displayed.
2.
Select the task that you want to activate.
3. Push
to activate the task.
•The activated task information is displayed.
4. Push [PTT] to communicate.
5. After finishing the communication, push
to delete the task.