![background image](http://html1.mh-extra.com/html/icom/ic-m423g/ic-m423g_instruction-manual_4301876078.webp)
68
7
DSC OPERATION
■
DSC Settings (Continued)
D
DSC Loop Test
The DSC loop test function sends transmit DSC signals to
the receive AF circuit to compare and check the TX and RX
signals at the AF level.
q
Enter “DSC LOOP TEST” in the DSC Settings menu.
MENU
➥➥
➪
DSC Settings
➪
DSC Loop Test
(Push [MENU].) (Rotate Dial, then push [ENT].)
w
Push [ENT] to start the DSC loop test.
• Push [BACK] to return to the previous screen.
• When the transmit DSC and receive DSC signals match, “OK” is
displayed.
e
Push [EXIT] to return to the normal operating mode.
If “NG” is displayed in step
w
, either or both TX and RX
DSC circuits has a problem. In that case, you will have to
send the transceiver to your nearest dealer for repair.
Summary of Contents for ic-m423g
Page 100: ...90 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 106: ......