Icom ic-m423g, Instruction Manual

Page: 85 / 110

75
9
MENU SCREEN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 ■
Menu screen items
The Menu screen contains the following items.
D DSC Calls
Item Ref. Item Ref.
• Individual Call p. 32 • Transmitted Call Log p. 62
• Individual ACK* 1 p. 34 • Position Request* 2 p. 39
• Group Call p. 36 • Position Report* 2 p. 41
• All Ships Call p. 38 • Polling Request* 2 p. 43
• Distress Call p. 26 • Test Call p. 45
• Distress Relay ACK*
5
p. 30 • Test ACK*
1
p. 47
• Received Call Log p. 63
D DSC Settings
Item Ref. Item Ref.
• Position Input* 3 p. 25 • Test ACK p. 65
• Individual ID p. 22 • CH 16 Switch p. 66
• Group ID p. 23 • Alarm p. 67
• Individual ACK p. 65 • CH 70 SQL Level p. 67
• Position ACK p. 65 • DSC Loop Test p. 68
* 1 Displayed only after receiving a corresponding call.
* 2 For only USA and Australian version transceivers.
* 3 Displayed only when no GPS information is received.
* 4 Displayed only when the optional HM-195 is connected.
* 5 For only USA version transceivers.
* 6 This setting may not be usable, depending on the transceiver ver-
sion or presetting.
D Radio Settings
Item Ref. Item Ref.
• Scan Type p. 76 • WX Alert*
2
p. 77
• Scan Timer p. 76 • RT Indicator* 5 p. 77
• Dual/Tri-Watch p. 76 • CH Display *
6
p. 77
• CHAN Group p. 76
D Configuration
Item Ref. Item Ref.
• Backlight p. 78 • Noise Cancel p. 80
• Display Contrast p. 78 • Inactivity Timer p. 81
• Key Beep p. 78 • NMEA Output p. 82
• Key Assignment p. 78 • Remote ID p. 83
• UTC Offset p. 80 • COMMANDMIC SP* 4 p. 83
D MMSI/GPS Info
The transceiver shows the preset MMSI and ATIS*
7
codes
and GPS information* 8 .
If the code is not entered, “NO DSC MMSI” or “NO ATIS
MMSI”*
7 is displayed.
*
7
Displayed only for the Dutch and German version transceivers.
*
8
Displayed only when an external or the built-in GPS receiver is
receiving valid position data.
Rotate