■
Receiving and transmitting
CAUTION:
Transmitting without an antenna may dam-
age the transceiver.
q
Turn [VOL] clockwise to turn power ON.
w
Set the audio and squelch levels.
➥
Rotate [SQL] fully counterclockwise in advance.
➥
Rotate [VOL] to adjust the audio output level.
➥
Rotate [SQL] clockwise until the noise disappears.
e
While pushing [H/L], push [CH] to change the channel
group. (p. 7)
• The European version has International channels only.
r
Push [
Y
]/[
Z
] to select the desired channel.
• When receiving a signal, “BUSY” appears and audio is emitted
from the speaker.
• Further adjustment of [VOL] may be necessary at this point.
t
Push [H/L] to select the output power if necessary.
• “LOW” appears when low power is selected, respectively.
• Choose low power to conserve power, choose high power for
longer distance communications.
• Some channels are for low power only.
y
Push and hold [PTT] to transmit, then speak into the mi-
crophone.
• “TX” appears.
• Channel 70 cannot be used for transmission (for GMDSS use).
u
Release [PTT] to receive.
IMPORTANT:
To maximize the readability of your trans-
mitted signal, pause a few sec. after pushing [PTT], hold
the microphone
2
to 5 cm from your mouth and speak
at a normal voice level.
3
BASIC OPERATION
8
0 IC-M401EURO_
(2).qxd 01.12.10 11:16 AM Page 8 (1,1)
Summary of Contents for IC-M401EURO
