15
7
TROUBLE SHOOTING
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF.
The transceiver does
not turn ON.
• Bad connection to the power supply.
• Check the connection to the transceiver and
power supply.
p. 6
Little or no sound comes
from the speaker.
• Squelch level is set too high.
• Volume level is set too low.
• Speaker has been exposed to water.
• Set the squelch to the threshold point.
• Set the volume to a suitable level.
• Remove the water with the AquaQuake func-
tion.
⁄1
*
⁄0
*
.
*
Transmitting is impossi-
ble, or high power can-
not be selected.
• Some channels are programmed for low
power or receive only by regulations.
• The output power is set to low.
• Change channels.
• Push [HI/LO] to select high power.
b
*
,
pp. 13, 14
n
*
Scan does not start.
• Favorite channels are not programmed.
• Set the desired channels as Favorite chan-
nels.
⁄3
*
No beep sounds.
• Beep tones are turned OFF.
• Turn the beep tones ON in the CONFIGURA-
TION menu.
‹0
*
Distress calls cannot be
transmitted.
• MMSI (DSC self ID) code is not pro-
grammed.
• Program the MMSI (DSC self ID) code.
p. 2
* Refer to the HM-195
commandmic
iv
™
instruction manual.
