![background image](http://html.mh-extra.com/html/icom/ic-m33/ic-m33_instruction-manual_612765009.webp)
Screw position
when removing battery
Screw position
when attaching battery
Make sure the rubber seal (purple) is properly seated in the
groove and dust or other material does not adhere to it.
Battery pack
Battery pack
Rubber seal
Groove
Correct position
Incorrect position
NOTE:
When attaching a battery pack, make sure dust or other
material does not adhere to the rubber seal. If dust or other
material is on the seal when attaching a battery pack,
waterproof protection may be compromised.
3
2
SUPPLIED ACCESSORIES AND ATTACHMENTS
2
D
Battery pack
To remove the battery pack:
Turn the screw counterclockwise one quarter turn, then
pull the battery pack in the direction of the arrow as shown
below.
To attach the battery pack:
Insert the battery pack in the transceiver completely, then
turn the screw clockwise one quarter turn.
NEVER remove or insert the battery pack when the trans-
ceiver is wet or soiled. This may result water or dust get-
ting into the transceiver/battery pack and may result in the
transceiver being damaged.
NOTE: When removing or attaching the battery pack, use
a coin or standard screwdriver to loosen or tighten the
bottom screw.
CAUTION:
When attaching or removing a battery pack, make sure
the rubber seal is set in the groove of the battery pack
correctly. If the seal is not neatly in the groove it may be
damaged when attaching the battery pack. If the seal is
damaged, waterproof protection is not guaranteed.
Summary of Contents for IC-M33
Page 1: ...INSTRUCTION MANUAL iM33 VHF MARINE TRANSCEIVER ...
Page 38: ...MEMO ...
Page 39: ...MEMO ...