![background image](http://html.mh-extra.com/html/icom/ic-m33/ic-m33_instruction-manual_612765032.webp)
26
TROUBLESHOOTING
10
PROBLEM
POSSIBLE CAUSE
SOLUTION
REF�
No sound from speaker.
• Squelch level is too high.
• Volume level is too low.
• Speaker has been exposed to water.
p. 12
p. 11
p. 13
• Set squelch to the threshold point.
• Push
[
Y
]/[
Z
] after pushing [VOL] to set a
suitable level.
• Drain water from the speaker.
The transceiver does
not turn ON.
• The battery is exhausted.
• The battery pack is not attached correctly.
p. 23
p. 3
• Recharge the battery pack.
• Attach the battery pack correctly.
Transmitting is impossi-
ble, or high power can
not be selected.
• Some channels are for low power or re
-
ceive only.
• The battery is exhausted.
• The battery over charged.
• The output power is set to low.
pgs. 8,
9, 27
p. 23
—
p. 10
• Change channels.
• Recharge the battery pack.
• Verify the battery voltage is correct.
• Push
[H/L] to select high power.
The displayed channel
cannot be changed.
• Lock function is activated.
• Push and hold
[LOCK] (H/L) for 1 sec. to
cancel the function.
p. 12
Scan does not start.
• “TAG” channels are not programmed.
• Set the desired channels as “TAG” channels.
p. 15
No beep.
• Beep tone function is turned OFF.
• Set the beep tone to ON (Fix Beep/User
Beep) in set mode.
p. 18
Battery voltage error.
• The connected battery pack’s voltage is
more than 11 V.
• Verify the battery voltage is correct.
—
Summary of Contents for IC-M33
Page 1: ...INSTRUCTION MANUAL iM33 VHF MARINE TRANSCEIVER ...
Page 38: ...MEMO ...
Page 39: ...MEMO ...