![background image](http://html2.mh-extra.com/html/icom/ic-m1v/ic-m1v_service-manual_4298601007.webp)
3 - 1
SECTION 3
DISASSEMBLY AND OPTION INSTRUCTIONS
• Removing the Rear panel
• Removing the MAIN unit
• Removing the RF unit
• Install the optional unit (UT-98 or UT-112) to the
connector (MAIN unit ; J3)
Unscrew 2 screws
A
(2
×
20 mm), and 4 screws
B
(2
×
5 mm, black) from the rear panel.
q
Unscrew 7 screws
C
(2
×
3.5 mm, silver) from
the MAIN unit.
w
Unplug J1 to separate the rear panel and the
MAIN unit.
q
Remove connector cap.
w
Remove 2 knobs, and unscrew 3 nuts (
F
,
G
,
H
)
e
Unscrew 3 screws
D
(2
×
3.5 mm, silver), and 2 screws
E
(2
×
5 mm, black) from the RF unit.
r
Unscrew 1 screw
J
(2
×
5 mm, black), and remove 1
washer
I
.
t
Take off the RF unit in the direction of the arrow.
Front panel
Rubber
A
B
B
J2
Rear panel
C
C
C
Rear panel
MAIN unit
J1
J1
RF unit
VR unit
Knob
Connector cap
E
D
J
I
G F
H
MAIN unit bottom view
UT-98 or UT-112
J3
NOTE : Once the front panel is removed, grease must be
applied to
areas before assembly.
Manufacture : Shin-Etsu Chemical
Type
: G-501
CAUTION :
DO NOT guarantee the waterproof construction when
installing the optional unit except distributors or dealers.